Non-CNC Busbar Bending Punching Cutting Machine JPMX-303DM
1.Three working units:
It has three working units: punching unit,cutting unit,bending unit. The three units can work at the same time. The working stroke of each processing unit is adjustable to save time and improve the work efficiency.
A.Punching unit:
1) United six-dies turn-plate structure, make sure the upper die and the lower die are absolutely in the center.
2) 6 punching dies can punch 6 kinds of holes, no need to replace the dies frequently.
3) Three location modes: locating pin, locating ruler and LED light.
4) No pressing mark on the workpiece surface.
5) Can punch non-standard holes with special dies, for example, square hole, oval hole etc.
6) 2 limit switches. (foot switch & press button).
6 punching dies turret punching working station. The punching dies
B.Cutting unit:
1) Use sharp shearing, flat incision interface, no droops, no burrs, no waste.
2) Two pressure type to make sure no apex angle.
3) 2 limit switches. (foot switch & press button)
Shearing/cutting work station shearing blade (T10)
C. Bending Unit:
With three electric motors and pumps,three working units(punching,cutting,bending units) can work at the same time without interference. Bending unit can complete horizontal bending,vertical bending,U bending,embossing,twisting by replacing the processing dies.
1) Horizontal bending.(2 sets horizontal bending dies)
2) Vertical bending. (2 sets vertical bending dies)
3) U bending (1 set)
Horizontal bending 2 sets of bending dies(3 pieces)
Vertical bending 2 sets of bending dies (4 pieces)
U-bending 1 set of U bending die
2.Main advantages:
1) Turret rotate punch, no need change dies, high efficiency, save time.
2) Cutting without any waste, save busbar. cutting adge very flat.
3) The machine has 4 foot-wheels, easy to move.
4) There are two operating modes: manual button and foot switch, which is simply operated.
3.Main components:
1)AC contactor, thermal relay, circuit breaker (Schneider)
2)Directional valve & Relief valve ( Yuken ):
4.Packing and shipping:
5.Copper busbar samples:
6.Configuration checklist:
8 sets of punching dies 1 set of shearing blade
2 sets of horizontal bending dies 2 sets of vertical bending dies
2 sets of horizontal bending dies 2 sets of vertical bending dies
1 set of U bending dies 3 sets of foot switches
1 set of oil filler 1 set of inner hexagon spanner
1 set of hydraulic system sealing ring 1 set of random tools
2 pieces of lmit switch 1 piece punching location needle.
2 pieces of lmit switch 1 piece punching location needle.
7.Workshop:
8.Certification of CE and ISO9001:
9.Contacting:
If you have any concern about our products,you are welcome to come to visit our factory to inspect the machine.Waiting for your kindly inquiry!
